Basecoats & Adhesives

Basecoats & Adhesives

   

Jade Bond

 

IMASCO Jade Bond is a polymer–based, non–cementitious, ready–mixed product, specifically used to adhere Type I expanded polystyrene (EPS) board to approved substrates, or as part of IMASCO COREFACTOR EIFS (Exterior Insulation Finish Systems). It is easy to spread and offers superior adhesion to substrates and other surfaces such as metal flashing.

Polybase-Dry

 

A polymer‚Ä“modified Portland cement–based product designed for use as a basecoat for acrylic stucco finish coats and as an adhesive for Type I expanded polystyrene (EPS) board and foam shapes. Alternately, use it as a skim coat over masonry or concrete surfaces in preparation for acrylic stucco finish coat.

Polybase-Dry NC (Non-combustible)

 

A polymer‚Ä“modified Portland cement–based product designed for use as a basecoat for acrylic stucco finish coats and as an adhesive for Type I expanded polystyrene (EPS) board and foam shapes. Alternately, use it as a skim coat over masonry or concrete surfaces in preparation for acrylic stucco finish coat.

Polybase-Wet

 

A polymer based product designed to be mixed with Type 10 portland cement for use as a basecoat for acrylic stucco finish coats and as an adhesive for Type I expanded polystyrene (EPS) board and foam shapes. Polybase–Wet can also be used as a skim coat over masonry or concrete surfaces in preparation for acrylic stucco finish coat.

Polybase Wet 1000

 

A polymer based product designed to be mixed with Type 10 portland cement for use as a basecoat for acrylic stucco finish coats and as an adhesive for Type I expanded polystyrene (EPS)board and foam shapes. Polybase‚Ä“Wet 1000 can also be used as a skim coat over masonry or concrete surfaces in preparation for acrylic stucco finish coat.