Stucco Components

Stucco Components

   

Finishes

 

Premix Finish Coat Stucco and Premix 1000 can be pigmented to match over 80 Custom Colours in a variety of textures. They are the most economical, long lasting and fade resistant of all stucco finish options.

Premix
 

Factory blended cement finish coat specially designed to provide a long lasting and durable textured colour coat. A wide variety of textures and colours allow for virtually unlimited architectural ingenuity and design imagination.

Premix 1000
 

Specially blended to provide improved workability, better coverage, colour consistency, and increased water resistance.

Artisan Premix
 

IMASCO Artisan Premix is a mixture of Portland cement (conforming to ASTM C150), hydrated lime (conforming to ASTM C206), inert aggregates, and additives specially blended to provide improved workability, better coverage, color consistency, and increased water resistance.

FogCoat
 

A bonding cement paint for application over exterior cement stucco, concrete or masonry surfaces that provides a durable, long lasting coating for existing stucco. FogCoat is formulated with Portland cement, hydrated lime and fade resistant mineral colour pigments. FogCoat is an ideal, economical solution for changing colours or correcting colour inconsistencies.

Artisan FogCoat
 

A bonding cement coating for application over cement stucco surfaces that provides a durable, long–lasting coating. ARTISAN FOGCOAT is an ideal, economical solution for changing colours or correcting colour inconsistencies.

IMASCO Prime
 

Provides a flat, uniformly absorbent, colour–coordinated surface for application of IMASCO acrylic finishes. As a surface preparation for water–based finishes, IMASCO Prime helps colour coordinate the substrate with the finish. It also enhances colour consistency, reduces flashing, increases texture consistency, improves bond strength and coverage, and increases working time in hot, dry weather.

FlexCoat Acrylic
 

Flexible 100% acrylic–based coating that is weather, fade and UV resistant and able to bridge hairline cracks in stucco.

Perfector Acrylic
 

Weather, stain and mold resistant, 100% acrylic–based coating. IMASCO Perfector Acrylic Finish is available in Fine Sandfloat, Medium Sandfloat and Definition Medium textures. The sandfloat finishes produce a sand–like or positive texture, while definition medium finish produces a negative or rilled texture.

Evolution Acrylic Finish
 

IMASCO Evolution Acrylic Finish is a weather resistant, 100% acrylic based coating designed for application over EPS foam board, Imasco GreatWall, portland cement plaster, cast–in–place concrete, and other approved substrates. It is available in a variety of colours and can be floated or textured. This finish is integrally coloured and fade resistant.

Canvas Acrylic
 

A weather resistant 100% acrylic–based coating designed to provide a wide variety of artistic finishes. Canvas Acrylic accepts a full range of tints to satisfy the most imaginative designer.

Basecoats

   
GreatWall Base Coat Concentrate
 

IMASCO GreatWall Basecoat Concentrate is a factory blend of Portland cement, fibers and proprietary ingredients. IMASCO GreatWall Basecoat Concentrate has improved workability, excellent coverage, compressive and flexural strength and resistance to shrinkage cracking. When mixed with sand and water it produces a fiber–reinforced stucco basecoat that provides a high quality substrate for a finish coat.

Imasco Sanded Basecoat
 

IMASCO SANDED BASECOAT is a factory blend of portland cement, properly graded sand, fibers and proprietary ingredients. IMASCO SANDED BASECOAT has improved workability, excellent coverage, and good cured properties. When mixed with water it produces a fiber–reinforced stucco basecoat that provides a high quality substrate for a finish coat.

Level-It
 

IMASCO LEVEL–IT is a polymer–modified fiber reinforced Portland cement based material designed for parging, smoothing, leveling, and patching uneven stucco, plaster, cement and masonry. Troweled on, IMASCO LEVEL–IT can be used from 1/8" to 3/8" thick in one coat.

Wire

 

Visit www.structawire.com for the most up–to–date product information and technical documents.

StructaCorners
 

Wire corner reinforcement made with heavy 16–gauge nose wire for stucco corners. All wires galvanized to ASTM standards to provide enhanced corrosion protection.

Structalath
 

A welded wire lath engineered to enhance the performance of stucco cladding and reduce cracking.

Structalath Twin Trac
 

Reinforcing lath simplifies the attachment of lath to wood and steel studs, making it ideal for commercial construction. Twin Trac has all the great features of regular Structalath with the addition of eight secondary cold–rolled longitudinal wires that add strength to form a 'track' for convenient attachment. Available in stainless steel.

Mega Lath
 

A self–furring welded wire providing heavy–duty reinforcing for both stucco and stone installation. Mega Lath is specifically designed for stucco applications that require extra reinforcing. Use Mega Lath wherever 2.5 or 3.4 metal sheet lath is specified. Available in stainless steel.

Structa Rib Lath (V Truss Walls & Ceilings)
 

Designed to improve the performance of stucco on overhead surfaces. V Truss for Walls & Ceilings is a self–furring welded wire lath for use as an alternative to 3.4 lb rib metal lath. This product is also approved for use on vertical surfaces and as a reinforcing component for rainscreen wall systems.