EIFS Components

EIFS Components

   

Barriers & Sealers

   
Protec-C
 

A polymer–based, non–cementitious, ready–mixed product. It is used as a weather–resistive barrier to prevent water penetration and air infiltration. PROTEC–C is intended for use in IMASCO COREFACTOR EIFS (Exterior Insulation Finish Systems).

Protec-J
 

A polymer–based, non–cementitious, ready–mixed product. It is used as a weather resistive barrier to prevent water penetration and air infiltration at sheathing board joints. Protect–J is a component of the IMASCO COREFACTOR EIFS (Exterior Insulation and Finish Systems).

Polyshield
 

A polymer–based, fiber–reinforced product designed to be mixed 1 to 1 by weight with portland cement to form a vapour and air barrier coating. It can also be used as an adhesive for expanded polystyrene EPS foam. It is suitable for application over cementitious sheathing, concrete, concrete block and water resistant gypsum sheathing.

Protec-VB
 

A polymer–based, non–cementitious, ready–mixed product. It is used when envelope construction requires a high–performance, type 1 air and vapour barrier. Highly flexible and suitable for many substrate types, IMASCO PROTEC“VB is intended for use in Imasco CoreFactor EIFS.

Basecoats & Adhesives

   
Jade Bond
 

IMASCO Jade Bond is a polymer–based, non–cementitious, ready–mixed product, specifically used to adhere Type I expanded polystyrene (EPS) board to approved substrates, or as part of IMASCO COREFACTOR EIFS (Exterior Insulation Finish Systems). It is easy to spread and offers superior adhesion to substrates and other surfaces such as metal flashing.

Polybase-Dry
 

A polymer“modified Portland cement–based product designed for use as a basecoat for acrylic stucco finish coats and as an adhesive for Type I expanded polystyrene (EPS) board and foam shapes. Alternately, use it as a skim coat over masonry or concrete surfaces in preparation for acrylic stucco finish coat.

Polybase-Dry NC (Non-combustible)
 

A polymer“modified Portland cement–based product designed for use as a basecoat for acrylic stucco finish coats and as an adhesive for Type I expanded polystyrene (EPS) board and foam shapes. Alternately, use it as a skim coat over masonry or concrete surfaces in preparation for acrylic stucco finish coat.

Polybase-Wet
 

A polymer based product designed to be mixed with Type 10 portland cement for use as a basecoat for acrylic stucco finish coats and as an adhesive for Type I expanded polystyrene (EPS) board and foam shapes. Polybase–Wet can also be used as a skim coat over masonry or concrete surfaces in preparation for acrylic stucco finish coat.

Polybase Wet 1000
 

A polymer based product designed to be mixed with Type 10 portland cement for use as a basecoat for acrylic stucco finish coats and as an adhesive for Type I expanded polystyrene (EPS)board and foam shapes. Polybase“Wet 1000 can also be used as a skim coat over masonry or concrete surfaces in preparation for acrylic stucco finish coat.

Mesh & Accessories

   
EIFS Mesh Regular/Contour
 

4 rolls per box. A roll covers 475 sq. ft. Available in 38” width by 150' length.

EIFS Mesh Detail
 

16 rolls per box. A roll covers 119 sq. ft. Available in 9.5” width by 150' length.

EIFS Mesh Armour
 

2 rolls per box. A roll covers 238 sq. ft. Available in 38” width by 75' length.

EIFS Mesh Ultra Armour
 

1 roll per box. A roll covers 238 sq. ft. Available in 38” width by 75' length.

EIFS Wide Self-Adhesive
 

4 rolls per box. A roll covers 475 sq. ft. Available in 38” width by 150' length.

Self-Adhesive
 

36 rolls per box. A roll covers 50 sq. ft. Available in 4” width by 150' length.

Starter Track
 

Engineered to allow incidental moisture to escape, IMASCO offers both Universal Starter Track and a custom produced Aluminum Track option.

Protec-Tape
 

PROTEC TAPE is a spun bonded non–woven polyester web reinforced with 5x5 yarns per inch mesh of 500–denier tenacity polyester. Possessing high tensile and tear strength, PROTEC TAPE wets out well with both cold applied cutbacks and emulsions. This mesh–backed tape prevents Protec J from penetrating and filling the joints.

Polystyrene

   
Polystyrene (EPS) Board with Grooved Foam
 

Type 1 EPS foam specially grooved foam board offers low price per unit of thermal resistance. Meets CAN/ULC 701–97. Available 1 ½” to 4” thick and 3/8” x 3/8” chamfer.

EIFS Finishes

   
IMASCO Prime
 

Provides a flat, uniformly absorbent, colour–coordinated surface for application of IMASCO acrylic finishes. As a surface preparation for water–based finishes, IMASCO Prime helps colour coordinate the substrate with the finish. It also enhances colour consistency, reduces flashing, increases texture consistency, improves bond strength and coverage, and increases working time in hot, dry weather.

FlexCoat Acrylic
 

Flexible 100% acrylic–based coating that is weather, fade and UV resistant and able to bridge hairline cracks in stucco.

Perfector Acrylic
 

Weather, stain and mold resistant, 100% acrylic–based coating. IMASCO Perfector Acrylic Finish is available in Fine Sandfloat, Medium Sandfloat and Definition Medium textures. The sandfloat finishes produce a sand–like or positive texture, while definition medium finish produces a negative or rilled texture.

Evolution Acrylic Finish
 

IMASCO Evolution Acrylic Finish is a weather resistant, 100% acrylic based coating designed for application over EPS foam board, Imasco GreatWall, portland cement plaster, cast–in–place concrete, and other approved substrates. It is available in a variety of colours and can be floated or textured. This finish is integrally coloured and fade resistant.

Canvas Acrylic
 

A weather resistant 100% acrylic–based coating designed to provide a wide variety of artistic finishes. Canvas Acrylic accepts a full range of tints to satisfy the most imaginative designer.